On 1 January 2026 the definitive phase of the EU's Carbon Border Adjustment Mechanism (CBAM) took effect. Importers who bring in more than 50 tonnes a year of certain carbon-intensive goods must obtain authorised CBAM declarant status, report the embedded emissions and surrender certificates priced from the EU emissions trading system.
- Decided by
- The European Parliament and the Council, implemented by the European Commission and the national authorities.
- Reach in Denmark
- Some groups
- Applies from
- 1 Jan 2026








© OpenStreetMap contributors (ODbL)
What has been decided
The regime is based on Regulation (EU) 2023/956. In the definitive phase, as the Commission describes it on its page on the definitive regime, EU importers or their indirect customs representatives who import more than a single mass-based threshold of 50 tonnes of CBAM goods a year must apply for authorised declarant status. They buy CBAM certificates from the national competent authority in the EU country where they are established. The price is calculated from the auction price of EU emissions allowances, in euro per tonne of CO2 emitted, as a quarterly average in 2026 and as a weekly average from 2027. Importers declare the emissions embedded in their imports and surrender the corresponding number of certificates each year. If they can prove that a carbon price has already been paid where the goods were produced, that amount can be deducted.
The Commission writes that the aim is to address the risk that companies move carbon-intensive production out of the EU, or that EU products are replaced by more carbon-intensive imports, as the EU raises its climate ambition while less stringent policies prevail outside the EU. CBAM is meant to ensure that a carbon price is paid for the embedded emissions in certain imported goods, so that the price is equivalent to that on domestic production, and that the EU's climate objectives are not undermined. The Commission writes that the mechanism is designed to be compatible with WTO rules.
Which goods are covered?
CBAM does not cover finished consumer goods, but the raw materials and semi-finished products whose production emits a lot of CO2. Annex I of the regulation names six groups:
- Iron and steel: almost all steel in sheets, bars, wire and reinforcing bar, and a range of finished steel goods: railway rails, tubes and pipes, steel structures, cans and drums, and screws, bolts and nuts.
- Aluminium: unwrought aluminium, profiles, plates, foil, structures and cans.
- Cement: cement clinker, Portland cement and other types of cement.
- Fertilisers: ammonia, nitric acid, nitrogen fertilisers such as urea, and mixed fertilisers containing nitrogen.
- Electricity imported from outside the EU.
- Hydrogen.
A car, a washing machine or a machine is not itself a CBAM good, even though it is made of steel and aluminium. The Commission's 2021 impact assessment writes that goods for final consumption are affected only indirectly. On 17 December 2025 the Commission proposed extending the mechanism to more goods further down the chain made of steel and aluminium. The European Parliament adopted its position on the proposal on 15 September 2026, but it has not been finally adopted.
The 50-tonne threshold does not apply to electricity and hydrogen. Their importers must be authorised declarants whatever the quantity.
What does it mean for prices?
One CBAM certificate covers one tonne of CO2. For imports in 2026 it cost 75.36 euro in the first quarter, 75.28 euro in the second quarter and 82.32 euro in the third quarter, according to the European Commission.
In the first years importers pay for only a small part of the emissions. The CBAM bill is reduced by the share for which the EU's own producers of the same goods still receive free allowances, and that share falls year by year: 97.5 percent in 2026, 95 percent in 2027, 90 percent in 2028, 77.5 percent in 2029, 51.5 percent in 2030, 39 percent in 2031, 26.5 percent in 2032 and 14 percent in 2033, according to the EU emissions trading directive. From 2034 there are no free allowances, and the full price is paid. The cost is therefore small in 2026 and grows towards 2034.
The cost lands first on the companies that import the goods, and can be passed on to those who use the steel, aluminium, cement and fertiliser. For consumers, the Commission's 2021 impact assessment expected a small effect: in 2030 about 0.06 percent higher prices for vehicles, 0.07 percent for household appliances and 0.03 percent for food in the EU. The Commission writes that the effect on final prices is too small to matter to consumers. No Danish estimate has been published.
What it means for Denmark
The rules apply directly to Danish importers in the six sectors when they exceed the 50-tonne threshold. The Danish Energy Agency is the competent authority in Denmark, and the Danish Business Authority handles applications for authorised declarant status on its behalf. How many Danish companies have been authorised has not been published. The certificates are a new cost on imports, unless an equivalent carbon price has already been paid in the country of production.
Who pays?
Importers pay. Companies that bring in more than 50 tonnes of CBAM goods a year must buy one certificate per tonne of CO2 embedded in the goods, at a price that follows the EU allowance price. Sales of certificates start on 1 February 2027, and certificates for 2026 imports must be bought and surrendered by 30 September 2027, the European Commission writes in its questions and answers on the mechanism, updated on 15 October 2026. How much of the cost importers pass on to their customers has not been measured.
The EU's own producers in the same sectors will also pay more. Their free emission allowances under the EU emissions trading system are being phased out gradually from 2026 to 2034, when they end, the European Court of Auditors writes.
Revenue from sales for 2026 and 2027 goes to the member states, Denmark included. On 17 December 2025 the Commission proposed that the countries transfer 25 percent of it to a Temporary Decarbonisation Fund to support EU companies in the covered sectors that risk losing production to countries outside the EU. The Commission estimates the fund's revenue at 632 million euro and its spending at 265 million euro. The European Parliament adopted its amendments to the proposal on 15 September 2026 by 433 votes to 97, with 146 abstentions. The Council has not adopted the proposal.
From 2028 the Commission has proposed that 75 percent of the revenue go to the EU budget as a new own resource, on average about 1.4 billion euro a year in 2028–2034 in 2025 prices, while the countries keep 25 percent. The proposal requires unanimity in the Council and approval in every member state, and in March 2026 it had not been adopted, the Court of Auditors writes. How much Denmark receives from the mechanism has not been published.
The Commission's stated reason for the mechanism is that imported goods should carry the same carbon price as goods produced in the EU, so that production and emissions do not move abroad. Russia has taken the mechanism to the World Trade Organization, the WTO. In its request of 12 May 2025, Russia calls the certificates a tariff-like charge that discriminates against imports and takes funds from the countries of origin that they would need for their own climate action. The EU declined to enter consultations, but the WTO established a panel on 25 September 2026, and 28 members, among them China, India and the United States, have reserved their right to take part as third parties. The Court of Auditors wrote on 14 April 2026 that the gap between the fund's expected revenue and spending raises doubts about the 25 percent share, and that the additional investment in lower emissions the fund would trigger has not been estimated.
What to watch
How many Danish importers obtain authorised declarant status in 2026? How will the certificate price move with the allowance price? And how will the new cost pass through to Danish construction and manufacturing prices when the first annual settlement falls due on 30 September 2027? Will the extension to more steel and aluminium goods be adopted?
Sources
- European Commission, CBAM definitive regime
- Regulation (EU) 2023/956 of the European Parliament and of the Council establishing a carbon border adjustment mechanism, Annex I (the goods covered)
- European Commission, price of CBAM certificates in 2026
- Directive (EU) 2023/959 of the European Parliament and of the Council on the EU emissions trading system, phase-out of free allowances
- European Commission, CBAM impact assessment, SWD(2021) 643, part 1, section 6.5.2
- European Parliament, Legislative Observatory, extension of CBAM to more goods, 2025/0419(COD)
- Danish Business Authority (Erhvervsstyrelsen), CBAM
- European Commission, CBAM Questions and Answers, updated 15 October 2026
- European Commission, new own resources for the EU budget, proposal of 16 July 2025
- European Court of Auditors, Opinion 13/2026 on the Temporary Decarbonisation Fund, 14 April 2026
- European Parliament, Legislative Train Schedule, The Temporary Decarbonisation Fund
- WTO, DS639: European Union and its Member States — Carbon Border Adjustment Mechanism
- WTO, Russia's request for consultations, 12 May 2025 (G/L/1573)
Changelog
- The sections 'Which goods are covered?' and 'What does it mean for prices?' were added: examples of the goods, the certificate price in 2026, the gradual phase-in up to 2034, and the Commission's estimate of the effect on consumer prices.
- The headline was changed from 'The EU carbon border levy' to 'EU carbon border levy on imports takes effect', so that it says what is happening.
- The section 'Who pays?' was added: what importers pay, the phase-out of free allowances, how the revenue is shared, and the criticism from Russia and the Court of Auditors.
- Image added: containers at the Port of Rotterdam, 26 August 2017 (CC BY-SA 4.0, AgainErick).
- Item created because the definitive CBAM regime entered into application on 1 January 2026.
